Author Topic: Hello from Hillsboro  (Read 776 times)

Offline Klaymore

  • Cloud City Member
  • Posts: 8
    • Awards
    • Awards
    • Awards
  • Real Name: Steve
Hello from Hillsboro
« on: November 13, 2022, 07:49:26 PM »
   Hi all,  I'm Steve from Hillsboro.  I have 3d printed a Rogue One Stormtrooper armor set.  I am working on the last few tweaks as suggested by the guys over at Whitearmor.net pre approval forum.   Hopefully I'll have everything ready to submit soon. 
    This project started last spring when I bought my 3d printer.  I printed and finished a test stormtrooper helmet.  It turned out good so I decided to go big and print a complete armor set.  The printer ran all summer and I was able to greet trick or treaters this Halloween as a ROTK. It was a lot of fun. 
  I look forward to Joining the 501st and trooping with you all.
     
     
  • Like

Offline Bendingoak

Re: Hello from Hillsboro
« Reply #1 on: November 13, 2022, 11:05:12 PM »
Welcome, I live in Hillsboro so if you need help please let me know.
« Last Edit: November 14, 2022, 11:48:06 PM by Bendingoak »
  • Like

Offline CadBane3

Re: Hello from Hillsboro
« Reply #2 on: November 14, 2022, 05:24:34 AM »
Hello and welcome! Looking forward to seeing it and meeting you!
  • Like
Mike
TK/TB/BH/DS/DZ-42125

Offline CJ49er

Re: Hello from Hillsboro
« Reply #3 on: November 14, 2022, 07:12:10 AM »
Welcome, Steve!

Impressive to print an entire TK, cant wait to see it!
  • Like
SL/TI/TK/DS/BH 12770

Offline Fox

  • Cloud City Member
  • Posts: 225
    • Awards
    • Awards
    • Awards
Re: Hello from Hillsboro
« Reply #4 on: November 14, 2022, 07:15:49 AM »
I saw your armor on that forum last week. I'm have no say in what gets approved but it looks very ready.
  • Like

Offline Lidocaine

Re: Hello from Hillsboro
« Reply #5 on: November 14, 2022, 11:36:01 AM »
Welcome to the forums! I also saw your pre-approval post on FISD and your 3d printed armor looks really impressive! Not a print line in sight, nice work!  :tk:

You put that Prusa through some serious work! What material did you print your armor? Again, fantastic work and looking forward to seeing your submission and likely approval soon!
  • Like
Luke - BH/TB/TK-44228

Offline Anzo

Re: Hello from Hillsboro
« Reply #6 on: November 14, 2022, 12:00:44 PM »
Welcome Steve! I look forward to your submission.
  • Like

Offline Klaymore

  • Cloud City Member
  • Posts: 8
    • Awards
    • Awards
    • Awards
  • Real Name: Steve
Re: Hello from Hillsboro
« Reply #7 on: November 14, 2022, 06:38:19 PM »
Welcome to the forums! I also saw your pre-approval post on FISD and your 3d printed armor looks really impressive! Not a print line in sight, nice work!  :tk:

You put that Prusa through some serious work! What material did you print your armor? Again, fantastic work and looking forward to seeing your submission and likely approval soon!

 Yeah I gave the Prusa a work out for sure.  After some testing of different filaments ABS, PETG and PLA Plus I went with Esun PLA Plus. (almost 11 rolls) It prints great and is very strong and flexible.  The downside is heat.  I won't be leaving it in my car on a 100 deg day.   
  • Like

Offline Nathanzx10r

  • Cloud City Admin
  • Posts: 326
  • GML
    • Awards
    • Awards
    • Awards
Re: Hello from Hillsboro
« Reply #8 on: November 15, 2022, 04:08:25 PM »
Yeah, PLA isn't the nest choice for trooping armor. I have seen it warp time and time again. PETG is the bare minimum IMHO. Welcome BTW lol
  • Like
Scout Trooper / RO-Tie Pilot / Tusken Raider

Tags: