Han Solo in Carbonite Project WIP. Allan's Big Prop done,Results page 5

[Terrys]

Wondering if you need a brace in the center of the box to support the middle.

[furiousstylz]

You're going to need a truck to get that to all the trooping events. It will never fit in the Mustang.

[OldTonyKenobi]

You're going to need a truck to get that to all the trooping events. It will never fit in the Mustang.

It will in the back seat with the top back!

[Quick2]

Update I added Bondo to the places I drilled screws in as well as frame where it met sides on panel and then sanded with 80 grit and then Carlos (right side) came over and we finished it with a 320 grit. The next step is to glue Han Solo in place , but I need to ask Chris (Greedo) what glue works with the foam that is on Han when I connect his top with torso, what type of glue to fasten it to board. I bought liquid nails. Then I will add bondo to seam and smooth out, but that is the next update. Here are progress pics.

[Jabbasdead]

better hurry up and finish that so you can add the anakin, obi, rex and ashoks in carbinite with it

[Ilovesanddirt]

My favorite picture is the one with Slave Leia on the wall!  NICE!!!!

[Quick2]

Today. Update. I put Han Solo form on board with Liquid Nails "Projects" Construction adhesive, and let that sit for over 24 hours with weights (books and 2 liter water bottles) .   Since he is foam filled it was a good and tight on board. Next I started my Bondo to texture around the Han Solo. Thank you Chris S. for your tips. I drilled and put screws in from bottom to fasten toes as well as Liquid Nails to hold.. Worked great.  Let me know what you think?

[The Kreator]

This is coming along great!  Will be awesome to see people's reactions at events where we're able to include it for photo ops. 

[Quick2]

Update: I had a gallon of Elmers glue and poured it on the HIC to texture while it dried. It took a few days but I was able to get the texture I wanted. the next day I again poured pools of Elmers glue to give it more of a liquified look on certain area's. I then waited for it to somewhat cure and then added a few more pools and then took a putty knife to spread it a bit. I will allow it cure and dry and then I will Primer Han and the box.

[Mosi]

Cool! But it looks like Han needs some immodium from the looks of the bottom pics. OOH! A double funny!

[Ilovesanddirt]

AWESOME ALLEN!!!!!

[greedo]

Looks great Allan, but if you could some how crowbar in the Leia poster in all of your progress pics that would be great.

thanks,

[OldTonyKenobi]

Lookin GREAT Allan! I just got a Slave Leia standee in my shop if you want one Chris ..............ol tony

[greedo]

I just got a Slave Leia standee in my shop if you want one Chris ..............ol tony

Bring it to the next poker game and we can find something to bet on I'm sure.

.....sorry Allan, back on topic

[Quick2]

Update:  I Painted HIC with Rustoleum Painters Touch Gray Primer. I then sanded with 320 grit sand Paper and then sprayed it again with Primer. I let dry. Then on the Solo Form I sprayed it with Rust-Oleum "Hammered" Silver just to see how it looked. I did a few spot test on Face board to see how it looked.. I will look to painting the 8 control Panels I just got. Enjoy Progress.





Here is HIC with second coat of Primer and Painited Han with Hammered Silver