Star Wars Oregon
Public Information => The Imperial Cantina => Topic started by: Hoot on February 16, 2010, 10:40:03 PM
-
On June, of 2008, I signed up on this forum. For a good two, or three, years I was a "guest" to the forum; seeing what the garrison was about. What am I getting at? After a along time of promissing that I will be done in a month, or two, with my uniform; the day has happened... sorta. :shock: :shock: :shock: Below are pictures of my uniform; as I have it today. I need to find my, finished, comm pad; so these pictures preliminary. However I want the garrisons honest opinion about about the uniform*.
* = I am asking the IOC, in the Imperial Crew section, to help me; however I value this garrisons opinion a lot more.
Front (http://i596.photobucket.com/albums/tt47/Hoot34/501st%20Uniform%20Pics/SDC10435.jpg)
Left Side (http://i596.photobucket.com/albums/tt47/Hoot34/501st%20Uniform%20Pics/SDC10436.jpg)
Back (http://i596.photobucket.com/albums/tt47/Hoot34/501st%20Uniform%20Pics/SDC10437.jpg)
Right Side (http://i596.photobucket.com/albums/tt47/Hoot34/501st%20Uniform%20Pics/SDC10438.jpg)
Please tell me what is (right, wrong, whatever).
Thanks,
-
Looks good to me, here are the IC specs:
Jumpsuit:
•One piece cover-all/jumpsuit/flight suit with a front invisible zipper. Color options: black (bridge crew) or light grey (technical crew)
•Flight suits should have breast pocket zippers removed or otherwise obscured.
•About a 1.5" (38.1mm) standing collar with a chevron shaped, left-over-right closure.
•Cog emblems on both shoulders.
•On the left forearm there is a com-pad pocket about 5" (mm) wide by 5.75" (mm) tall with no flap and a 2.25" (mm) window in it. (Size will vary to match your com-pad)
•On the left bicep, about 2" below the cog emblem, there is a code cylinder pocket about 5.625 (mm) square with no flap, vertical stitching dividing it into pen sleeves. The bottom front corner of the pocket is cut off at a bevel.
•The right sleeve has a cargo pocket about 6.125" (mm) wide and 5.75" (mm) on the bicep 2" below the cog emblem. The pocket has a 2" square flap.
Cog Emblems:
•Placement on both shoulders with top edge of the patch 1" (25mm) below the shoulder seam.
•3.5" (89mm) patch with a white "imperial cog" on a black background
Communications Pad (TBD):
•Size
•Color
•Placement
Hat:
•Fabric should be a medium weight black suiting material. Gabardine style weave is most accurate.
•The base of the hat should be conical, with a crown about 4" (101.6 mm) tall.
•The front and rear "flaps" should overlap on the sides and be about 4" (101.6 mm) high.
•The front bill extends 3" (76mm) down, decorated with 6 or 7 concentric stitches.
•An "Imperial Code Disk" is positioned in the center of the front vertical "flap."
Imperial Code Disk:
•A stepped cone shape appearing to be 3 disks stacked on top of one another.
•The bottom disk is 1" (25.3 mm) the middle disk is 3/4" (19.1 mm) and the top disk is 1/2" (12.7 mm.)
•There is an indentation in the center of the top disk about 1/4" (6.4 mm)
Belt:
•The belt should be constructed from a non-textured, black leather or a leather-like material, approximately 2" (50.8mm) in width (up to 3" (76mm) is acceptable)
•To the right of the buckle, a single large snap or rivet about .5" (12.7mm) should be visible about 1" (25.4 mm) from the buckle.
Buckle:
•The buckle should be constructed from a horizontally brushed metal, or metal looking material.
•The size should be 2 5/8" (66.7 mm) high and 4 1/8" (104.5 mm) wide with 0.5" (12.7 mm) radius rounded corners.
•Canon buckles have a slight horizontal curve around the body.
•Buckles are adorned with a "Imperial Code Disk" at the center.
•Costumebase/Costumebay buckle is NOT acceptable
Boots:
•Calf-height black leather or leather like material. Rubber is not acceptable.
- No buckle or strap across the top of the foot. Buckle at top of shaft is permitted if unavoidable.
•German "jack boot" style boots are most canon
-
I'll look at the photos a bit later when I get the chance. I have to get the boy
off to school.....
-
Hey Matt
I've looked over your photos and they good to me.
The only concern I have "Is an all black com pad acceptable?"
I went to the IC forum and went over the CRL and the color
schemes are still tentative. So I directed my question
to the detachment leader. Once I hear back from them
I'll know more.....
-
Hey Matt
I've looked over your photos and they good to me.
The only concern I have "Is an all black com pad acceptable?"
I went to the IC forum and went over the CRL and the color
schemes are still tentative. So I directed my question
to the detachment leader. Once I hear back from them
I'll know more.....
He said his comm pad ISN'T in the shots because he couldn't locate his finished one pics.
-
He said his comm pad ISN'T in the shots because he couldn't locate his finished one pics.
Oh durrrr.......I guess I should learn to reread english......
-
I just heard back from Rome, and, in short, they say you're good to go.
I can't argue with that. You can submit it as is, or if its your preference,
color your compad. Either way, once I get Legion GML privileges,
you're in.
-
I just heard back from Rome, and, in short, they say you're good to go.
I can't argue with that. You can submit it as is, or if its your preference,
color your compad. Either way, once I get Legion GML privileges,
you're in.
Tony you should be able to have those now on 501st Forums.. please let me know. So I can find out what is hold up.
Matt, looks nice, looking forward to have you be at an Official troop .
Peace, Allan
-
Ralph, Tony, Allen & Mosi:
Thanks for the feedback. As it turnes out my comm pad was in, the bottom of, my uniform bin. I will be updating my picture this afternoon. :D :D
-
Allan, Tony or myself still do not have Legion priveledges....Is that something they upgrade after the elections?
@Matt, looking good.
-
Allan, Tony or myself still do not have Legion priveledges....Is that something they upgrade after the elections?
@Matt, looking good.
Same for me. I went to the Group page of the Legion forum, and it linked me to Albin. He replied and cc'd the outgoing Legion Webmaster and the incoming one, and they said it's just a matter of waiting until Stuart updates the database.
-
Allan, Tony or myself still do not have Legion priveledges....Is that something they upgrade after the elections?
@Matt, looking good.
Ralph and Tony, The 501st said to me that they are Updating the System and to be patient. All will be updated as soon as possible.
@ Matt, Looking forward to your updated Pics.
Peace, Allan
-
UPDATE:
An update guys.
Front (http://i596.photobucket.com/albums/tt47/Hoot34/501st%20Uniform%20Pics/IMG_0658.jpg)
Left Side (http://i596.photobucket.com/albums/tt47/Hoot34/501st%20Uniform%20Pics/IMG_0660.jpg)
Left Side 45 deg. (http://i596.photobucket.com/albums/tt47/Hoot34/501st%20Uniform%20Pics/IMG_0659.jpg)
When I get the email to send my pictures, to whoever, should I submitt the 45 deg left or, the full left, pictures?
-
Should go to Tony...
-
You don't need to email them anywhere. I can just snatch them off of your post here.....
-
You don't need to email them anywhere. I can just snatch them off of your post here.....
Cool. 8) 8)