Painted the arm and leg greeblies:
Then attached the clips to the forearms:
And the biceps:
I think I trimmed too much return edge from the inner chest shoulder:
Since I was worried about having enough space for the shoulder plate support tabs and strapping slots, I glued some little bits to both sides to fill the gap. Then trimmed and sanded:
Then I sanded the lip caused by the overlap on the shoulders, to prep for ABS paste:
Decided to tackle the ab seams first, so I taped off the area to prevent any spread and applied to the left side:
I used a toothpick, which I thought would help get it into the seam, but turned out to make a messier application:
So on the right side I used a popsicle stick, which was much easier to work with:
Next, I applied the ABS paste to both shoulders:
I’ll let this dry overnight and then try some sanding tomorrow.