Star Wars Oregon
Public Information => Imperial Armor => Stormtrooper Builds => Topic started by: Rat on December 21, 2016, 07:59:48 PM
-
I've already got my Rubies blaster, TK Boots, materials for the neck seal, under suit, gloves and building brackets now. So excited and happy, it may have taken a year almost, but finally I'll hopefully have a kit by my birthday (September) next year.
Sent from my 5054N using Tapatalk
-
Awesome! We'll all be looking forward to seeing pictures of your build!
-
Awesome! And a very Merry Christmas to you! Lol
-
Of that kit arrives sooner than that we can get your kit ready long before September! Welcome and let me know if you need some help!
Sent from my iPhone using Tapatalk
-
Will do James right now they are looking at a Q3 shipping. Thank you all and yeah look forward to getting started on the actual build.
Sent from my 5054N using Tapatalk
-
We could always get to work on that blaster in the mean time!
Sent from my iPhone using Tapatalk
-
We could always get to work on that blaster in the mean time!
Sent from my iPhone using Tapatalk
I have a Rubies that I painted and weathered already. I do plan on eventually getting something more accurate down the road though.
Sent from my 5054N using Tapatalk
-
So in deciding to go with an Anovos kit, because payment plan, I finally paid that off now just waiting to pay my shipping fee. One step closer and it looks like this will most likely be a birthday arrival for that BBB.
Sent from my 5054N using Tapatalk
-
So in deciding to go with an Anovos kit, because payment plan, I finally paid that off now just waiting to pay my shipping fee. One step closer and it looks like this will most likely be a birthday arrival for that BBB.
Sent from my 5054N using Tapatalk
Congrats!
-
Thanks Daryl.
Sent from my 5054N using Tapatalk
-
So it's totally official now, shipping paid and now the wait. Their schedule says a summer delivery but from what I've heard we will see.
But I'm just stoked to finally be an official owner of a TK kit.
Sent from my 5054N using Tapatalk
-
So it has come to pass and my patiencshas paid off just got my shipping confirmation just slightly over a year after ordering. I should be celebrating BBB day next week. Pictures to come.
Now the nerves really kick in.
Sent from my VK815 using Tapatalk
-
Now the real work can begin, finally.(https://uploads.tapatalk-cdn.com/20180110/bc9caf00adaf916a3f4812d5ef6eb3e6.jpg)
Sent from my VK815 using Tapatalk
-
nice!
-
nice!
Thanks Chris.
Sent from my VK815 using Tapatalk
-
Congrats!
-
Congrats!
Thanks Daryl. I may have questions for you.
Sent from my VK815 using Tapatalk
-
Now the fun
and terrifying part begins! :grin:
-
Congrats and now the fun begins
Sent from the Utapau battle front
-
Scot and Brian thanks. Gonna be a crazy and wild adventure I'm sure.
-
Grats!!
-
Thanks
Sent from my VK815 using Tapatalk
-
Alright so after little sleep and running errands the trimming has begun. Main body parts, an buttons, hand plates rough trimmed so far. Doing biceps and shoulder bells now.(https://uploads.tapatalk-cdn.com/20180111/8d5f11acb520972632ab97eb75a3bf75.jpg)(https://uploads.tapatalk-cdn.com/20180111/368e91b42470727af94c44a0a27c997a.jpg)(https://uploads.tapatalk-cdn.com/20180111/b88386943b84f0a13ff693dcdc7e1177.jpg)(https://uploads.tapatalk-cdn.com/20180111/05eb6776f67627f762c10eec1d17d172.jpg)(https://uploads.tapatalk-cdn.com/20180111/901741dcfe3dfc3a7efc70085b7a4601.jpg)
Sent from my VK815 using Tapatalk
-
Managed the front of the biceps and a shoulder bell.(https://uploads.tapatalk-cdn.com/20180111/6ea647c62120e8a9493cec43fd7f0541.jpg)(https://uploads.tapatalk-cdn.com/20180111/d78a09f598c17afbb625eab6607fe58a.jpg)(https://uploads.tapatalk-cdn.com/20180111/2180ffa1b03960965a666b389b95d725.jpg)
Sent from my VK815 using Tapatalk
-
Alright! Big brown box day! Nice to see that your armor is finally here!
Some of the Anovos guys can chime in with more up to date info, but if I remember right the trim lines were pretty generous (lots of extra) for some of the parts.
Triple check CRL requirements for return edges, etc. Some of the spots you'll need to take off more than what Anovos suggests.
-
Alright! Big brown box day! Nice to see that your armor is finally here!
Some of the Anovos guys can chime in with more up to date info, but if I remember right the trim lines were pretty generous (lots of extra) for some of the parts.
Triple check CRL requirements for return edges, etc. Some of the spots you'll need to take off more than what Anovos suggests.
Yup, they were generous enough that they fit my fat larger frame. An average person should have plenty of room to work with in theory. Always start large though!
I think the only return edge that goes against Anovos's instructions is the forearm around your wrist. That just goes away entirely. That being said, if you aren't already, I'd mostly ignore Anovos and follow this guide instead. https://www.whitearmor.net/forum/topic/35086-ukswraths-anovos-tk-build/
-
Yeah so far I've only trimmed to the ANOVOS lines and can tell I'll be trimming more on some of it. I have by and large ignored their instructions. Tonys thread is pretty good. I have going over. Mike "TK1636" video series on YouTube really good and informative for the kit. The new ones have unassembled belts, though they still place the snaps, and added pads to the bucket instead of the liner. Wrist return edge is already off. 2/3rds of the way through the rough trim now.
Sent from my VK815 using Tapatalk
-
Finished rough trimming everything out today, even remembered to get rid of the return edge on the forearms. Now to move on to the fitting and final trimming. Looking over the bucket I realized I definitely need to repaint the frown and possibly fix the right ear. Just glad it fits me comfortably. I also retrimmed the hand plates down to 5mm.(https://uploads.tapatalk-cdn.com/20180112/b8ae1c52824341e64f4d37e5b914dbb8.jpg)(https://uploads.tapatalk-cdn.com/20180112/ba892b67d4187dca502bd3f3ba3757b7.jpg)(https://uploads.tapatalk-cdn.com/20180112/2b25d91c39f812d3f065b9031b7e719b.jpg)(https://uploads.tapatalk-cdn.com/20180112/2e7cdea69804e25be9b88c7f040408e9.jpg)(https://uploads.tapatalk-cdn.com/20180112/636b18659f41f6e3e132aec5fe3b59a7.jpg)(https://uploads.tapatalk-cdn.com/20180112/85287162fb69ad3e79882fe68678e311.jpg)(https://uploads.tapatalk-cdn.com/20180112/4efddb93b9135239e8f566d93a08afe9.jpg)
Sent from my VK815 using Tapatalk
-
Wow! Fast progress! Looking good!
-
i wouldn't worry about the ear to much.. if you look at a lot of the ref pics there is gaps and imperfect ears. the back side looks fine.. maybe a little closing of the gap by the Tube Stripes but likely not a huge issue.
you are cranking through it! that's a lot of trimming in a day!!!
-
Wow! Fast progress! Looking good!
Thanks.
Sent from my VK815 using Tapatalk
-
i wouldn't worry about the ear to much.. if you look at a lot of the ref pics there is gaps and imperfect ears. the back side looks fine.. maybe a little closing of the gap by the Tube Stripes but likely not a huge issue.
you are cranking through it! that's a lot of trimming in a day!!!
Thanks, I was more concerned about the front and I know it isn't too bad. Yeah been a crazy weekend for me. Now to move on towards the fitting and trimming and sanding.
Sent from my VK815 using Tapatalk
-
Don’t worry about the ear. The gaps on one of mine are at least that much and I am an EIB level TK. Put your time and energy into the rest of that kit!
Jim - TK50899
-
Thanks Jim. It was a quick thing for me approval wise I know it's fine.
-
So started fitting and hoping I didn't mess it up and got it right. It isn't real pretty but it fits and I'll moist likely be trimming the return edge down more. It has a little bite to it, but it hasn't been sanded or anything yet.(https://uploads.tapatalk-cdn.com/20180113/ade2061cac50a53c78d2f1c500680c10.jpg)(https://uploads.tapatalk-cdn.com/20180113/caeadebc693da791ea4afa079e61751c.jpg)(https://uploads.tapatalk-cdn.com/20180113/2982c1c52848b9929e97e5f15685fdd3.jpg)(https://uploads.tapatalk-cdn.com/20180113/f0638ee55ed47ef21c3712e916d9e53b.jpg)(https://uploads.tapatalk-cdn.com/20180113/a095d2242716ac33697097df05a3cfb2.jpg)
Sent from my VK815 using Tapatalk
-
I generally went with about 1/2 of the Anovos suggested return edge.
-
I generally went with about 1/2 of the Anovos suggested return edge.
Thanks Daryl. So about 2 to 3 mm right? Just had replies over at FISD from Tony and Paul saying remove all the return edge from the wrist and inner elbow and leaving minimal on the outer elbow. So I figure the 2-3mm as that is about half of what is there.
Sent from my VK815 using Tapatalk
-
A little more done. Forearms, biceps and shoulder bells sized, trimmed and sanded, ready for gluing. I think anyways. Most of the back, kidney, butt are trimmed and sanded. Still have the legs to go. Also started the belt, but realized I have no mounting hardware for the holster so went went to ANOVOS and talked about that waiting to see what happens there.(https://uploads.tapatalk-cdn.com/20180119/11f3db3acd16761da57ba5b23e6f5fb3.jpg)(https://uploads.tapatalk-cdn.com/20180119/14b4573605dcee59d472e4718ad75853.jpg)(https://uploads.tapatalk-cdn.com/20180119/7e80293c4b1574e687b6d488c2523ef1.jpg)(https://uploads.tapatalk-cdn.com/20180119/3057136899b7f27d72c9b9fd2d8af7ae.jpg)
Sent from my VK815 using Tapatalk
-
The belt So far.(https://uploads.tapatalk-cdn.com/20180119/d95c44a2664ae879be4da8ed25eab31e.jpg)
Sent from my VK815 using Tapatalk
-
The belt So far.(https://uploads.tapatalk-cdn.com/20180119/d95c44a2664ae879be4da8ed25eab31e.jpg)
Looking good.
I’d recommend that you align the drop boxes with the edge of the plastic belt.
-
The belt So far.(https://uploads.tapatalk-cdn.com/20180119/d95c44a2664ae879be4da8ed25eab31e.jpg)
Looking good.
I’d recommend that you align the drop boxes with the edge of the plastic belt.
Oh I will be, still need to glue the straps. They're riveted but not fixed down yet.
Sent from my VK815 using Tapatalk
-
id say just hit home depot for some chicago screws to mount your holster rather then waiting for Anovos.. i wanna say they are 1/2 inch or 1/4 inch.. once you get it mounted make sure you toss some super glue or thread lock inside the screw becuase they back off really easy.. i had my holster almost fall off one day when i was getting out of it.
-
id say just hit home depot for some chicago screws to mount your holster rather then waiting for Anovos.. i wanna say they are 1/2 inch or 1/4 inch.. once you get it mounted make sure you toss some super glue or thread lock inside the screw becuase they back off really easy.. i had my holster almost fall off one day when i was getting out of it.
Good to know and it is likely I will do the trip rather than wait on anovos. I also need to get some rivets for the ammo knee.
Sent from my VK815 using Tapatalk
-
You will likely need to order the rivets from the fisd board.. I think cap rivets are hard to find at Alot of home improvement stores.. Maybe an ace would have them
-
You will likely need to order the rivets from the fisd board.. I think cap rivets are hard to find at Alot of home improvement stores.. Maybe an ace would have them
Yeah I have an Ace hardware nearby, but I've also got a leather shop/supply locally as well.
Sent from my VK815 using Tapatalk
-
So got a little more done drop boxes glued, belt attached and rivet covers placed. Glued the elastic to boxes and top corners of fabric belt, trying to avoid the "droop" issue with the anovos belt. I also came across a couple of rivet issues but have gotten some feedback over at FISD about dealing with them. I've also started gluing the biceps, but may trim just a little more before closing them up.(https://uploads.tapatalk-cdn.com/20180121/a13763ef79724bd68fc5e338b81859a5.jpg)(https://uploads.tapatalk-cdn.com/20180121/b400e1048dab14528be0c03001aa18a7.jpg)(https://uploads.tapatalk-cdn.com/20180121/bba7a70adc0a332bfcba0475fb7e52d0.jpg)
Sent from my VK815 using Tapatalk
-
So a quick update been working on getting biceps done, working on forearms and looking at the thighs. My main body is mostly okay I think need to get that all mocked up and fitted soon. But here's where I'm at now.(https://uploads.tapatalk-cdn.com/20180123/1332e21ee70a9df7ba95d3f2ad7f1815.jpg)(https://uploads.tapatalk-cdn.com/20180123/47881aea885f2dc16a6daa0e97b58fbd.jpg)(https://uploads.tapatalk-cdn.com/20180123/d5c1c762c7b151851b842a6db577c176.jpg)(https://uploads.tapatalk-cdn.com/20180123/a1d1646ec86af642372e02d003a78f00.jpg)(https://uploads.tapatalk-cdn.com/20180123/4204fcbda539263697cc5307e3eb4b7c.jpg)(https://uploads.tapatalk-cdn.com/20180123/94a109f27237f687b13adaf47131f742.jpg)
Sent from my VK815 using Tapatalk
-
To Daryl thanks for the wisdom on the thighs and I'm glad to know I won't be needing to trim and modify them.
Sent from my VK815 using Tapatalk
-
I have thighs and shins and pretty sure I'll have no trimming to do, I may be wrong I'll leave it to the folks who know more. My only thoughts for trimming is possibly the lower part of the thigh and the ankle but not sure.(https://uploads.tapatalk-cdn.com/20180126/86bb7a919b609394fe93d7173142e2f9.jpg)(https://uploads.tapatalk-cdn.com/20180126/165c7965da85c41c600c3bb966aa2be1.jpg)(https://uploads.tapatalk-cdn.com/20180126/260fe52d3eb85c4b6a419329b5ec0908.jpg)(https://uploads.tapatalk-cdn.com/20180126/27d48098a9a2389c310311fb6daec550.jpg)(https://uploads.tapatalk-cdn.com/20180126/172232a260748b0fb39e02754fc6cd60.jpg)(https://uploads.tapatalk-cdn.com/20180126/4629d4763e9068f4524e7d40b370ee7c.jpg)
Sent from my VK815 using Tapatalk
-
looks like they are fitting well.. bottom of the ankle from what i see looks good.
-
Yeah they fit well and comfortably so I doubt I will trim them anymore than what I have so far. This is just at the initial anovos line. I also found a use for the supplied white velcro.(https://uploads.tapatalk-cdn.com/20180127/7eccc4c034d36e3f8a1fe91d126b5cca.jpg)
Sent from my VK815 using Tapatalk
-
Overcoming slight rivet issue. Clipped them down and then used some of the material I have for my neck seal to cover them. Decided to go ahead and make the straps for the thigh garters.(https://uploads.tapatalk-cdn.com/20180127/eb2eef89df22c94ac00c48a70b47d16e.jpg)(https://uploads.tapatalk-cdn.com/20180127/d0f5b17c13ddba8948c3e626eb4bd1d3.jpg)(https://uploads.tapatalk-cdn.com/20180127/b8bfa8613b4a0c54fbda0d402c3cd4cb.jpg)
Sent from my VK815 using Tapatalk
-
To trim even or not? This is my question here.(https://uploads.tapatalk-cdn.com/20180127/8b39bcdf0b547081fb33fc3ca668ec23.jpg)
Sent from my VK815 using Tapatalk
-
Is that the back of the shin? Yes just match the arch. make sure it's even at the top first with no rwist
-
Is that the back of the shin? Yes just match the arch. make sure it's even at the top first with no rwist
Yes it's the back of the shin. The tops are aligned and I still need to do the cover strips. I've also managed some inner strips for the shins. This was just a something I've been wondering about.
Sent from my VK815 using Tapatalk
-
you could also just extend the cover strip to cover that mismatch.. really depends on how you want it to look sitting on your shoe in the back.. i think either way would be fine
-
Yeah I think I'm gonna have to think on that, but knowing me I'll probably trim them. I still have that forearm to contend with.
Sent from my VK815 using Tapatalk
-
Did some inner strips on the shins from some of the scrap material.(https://uploads.tapatalk-cdn.com/20180128/e9c186629066652bc9db789c8404cde7.jpg)(https://uploads.tapatalk-cdn.com/20180128/eb6fd96792f5320172ce5bb04bac6fa8.jpg)
Sent from my VK815 using Tapatalk
-
So I've come into a dilemma with the shins. Luckily I put my inner strips on the same sides so that I can interchange between the two sides. So I noticed that when I lined up the front tops that the rear didn't want to line up. Also the ankles had a definite longer and shorter side originally. However when I changed them to get the tops lined up the length difference went away. I'm also finding it difficult to get the sniper knee to fit properly. I have held off on gluing it all so far minus the inner strip. So any help here would be great before I proceed. Here are some picture after swapping the pieces, the tape is just to hold them together.(https://uploads.tapatalk-cdn.com/20180130/b78f753ddf33f38b2e84b65038a3b1f1.jpg)(https://uploads.tapatalk-cdn.com/20180130/5d4336297b430da9fdb4f3ac094fccb4.jpg)(https://uploads.tapatalk-cdn.com/20180130/a3e6d93a6cb8e2c549b308d4f4609c70.jpg)
Sent from my VK815 using Tapatalk
-
So with a little help from Daryl I believe I've sorted the shins properly, still the debate rages on which is which though.(https://uploads.tapatalk-cdn.com/20180131/068b04ebc0648af4d2cf9485d270b816.jpg)
Sent from my VK815 using Tapatalk
-
So after surviving the household plague I'm back at it. Got some bicep clips done and gluing, fixing a piece of strapping for the shoulder bell, glued on the ab buttons and started gluing my forearms. It's gonna be slow, but getting there. Also did some final fitting with the things.
-
So about halfway through gluing the forearms, taking it slow and giving lots of cure time. Had a warping issue in using a heat gun for reshaping the right one. I don't think it stands out much, but for anyone that knows it will be noticeable.(https://uploads.tapatalk-cdn.com/20180221/7a30a4834c4b8edc907344326f784fe8.jpg)(https://uploads.tapatalk-cdn.com/20180221/13fe563ec1de11d521a03b6844898674.jpg)
Sent from my VK815 using Tapatalk
-
So not sure this needs a picture or not, but my thighs and shins fit well with no real need to trim more. However the back of them don't line up great, the top and bottom butt together, but there's a slight gap in the middle and I'm not sure what to do. My concern is if I trim them more they'll be too tight. Any advice or ideas would be great.
Sent from my VK815 using Tapatalk
-
Here are some picture of the shin.(https://uploads.tapatalk-cdn.com/20180222/30b2e5d9dd94f474b23c01f16319d050.jpg)
Sent from my VK815 using Tapatalk
-
So find myself in another quandry. Left forearm looks good, but the lower seam isn't meeting up at the return edge. Should I pull it and redo it or is it okay? It's on the bottom and unlikely to be seen, but not sure.(https://uploads.tapatalk-cdn.com/20180222/f77af847ee5ebe97620a7f16f6881acb.jpg)(https://uploads.tapatalk-cdn.com/20180222/99400d32fa2df63b9776ad0eb59b01fd.jpg)(https://uploads.tapatalk-cdn.com/20180222/bbf2da7c2e796fa141486be09bbe3b8a.jpg)(https://uploads.tapatalk-cdn.com/20180222/5b245178fb13048eb28b54b2188554d8.jpg)
Sent from my VK815 using Tapatalk
-
I'd vote that the left forearm alignment is good, but I dont have a completed TK :)
Hopefully one of our garrison TK champs will can chime in
-
Left arm is complete.(https://uploads.tapatalk-cdn.com/20180223/8d3843ae62439bed8721e214aaea41c7.jpg)(https://uploads.tapatalk-cdn.com/20180223/74dc784788dec845ddadc00397d49bc3.jpg)
Sent from my VK815 using Tapatalk
-
I'd vote that the left forearm alignment is good, but I dont have a completed TK :)
Hopefully one of our garrison TK champs will can chime in
Got the word over on FISD that its good with the only concern being that the strip isn't covering enough. But it fits well and it feels solid.
Sent from my VK815 using Tapatalk
-
So in waiting for the E6000 to cure on my right forearm and thigh cover strips. I'm doing them one side at a time, lack of magnets and it also lets me not rush through. I decided it was time to tackle the ab/kidney section. So I drilled holes for the split rivets and snaps and then got those in, they're not pretty, but they're in and secure.(https://uploads.tapatalk-cdn.com/20180223/204162f1ffd8f70df1035e9d826e9a82.jpg)(https://uploads.tapatalk-cdn.com/20180223/4504d226f2c3efcfdef5cc9dcaa53c58.jpg)(https://uploads.tapatalk-cdn.com/20180223/5936cb65d4f1cf4c5663b84895820659.jpg)(https://uploads.tapatalk-cdn.com/20180223/020a3f159355877fe93588358e6a471f.jpg)(https://uploads.tapatalk-cdn.com/20180223/28ba97ba7ff311c6b76a2d49946635d5.jpg)
Sent from my VK815 using Tapatalk
-
So got out and got some supplies and started installing the brackets. I'm not sure I'll be able to use them, but it's not out of the question, just not sure. I'll find out definitely when I move to the ab. If they don't then I'll finish of the screws and then convert the strapping to the snap plates method and leave them for the look.(https://uploads.tapatalk-cdn.com/20180224/3dab8a163337361390602c66ea06136e.jpg)(https://uploads.tapatalk-cdn.com/20180224/8c9aef9e080af5d4c8016241039c52dc.jpg)(https://uploads.tapatalk-cdn.com/20180224/d4927f8416720508fcbfb16e6ae667e5.jpg)(https://uploads.tapatalk-cdn.com/20180224/77934b230adfafce966cb1be839394e6.jpg)
Sent from my VK815 using Tapatalk
-
coming along nicely! Do you have a goal date to be trooping by?
-
Hoping to be entirely done building and approved before Solo. Right forearm should be cured by the time I get home tonight. Which means arms will be completed. Just started on the thighs and shins. Finished off drilling for brackets still need to make loops and sizing the body, but I don't think I'll need to do much there. Then painting buttons and frown and done.
Sent from my VK815 using Tapatalk
-
So I believe I can call my arms done. Just need to attach the bicep and forearm. This is my right arm, the one I had to reshape due to accidentally trimming a bit too much. It's a tight getting my hand through the wrist, but after I get through it fits well.(https://uploads.tapatalk-cdn.com/20180225/bb9fc7a5824b4608044da9f80025e083.jpg)(https://uploads.tapatalk-cdn.com/20180225/66f5901e107a90aa65f12e79f56b7ad2.jpg)
Sent from my VK815 using Tapatalk
-
Arms are done. I may need to warm the return edge on the right forearm to flatten it a little though.(https://uploads.tapatalk-cdn.com/20180225/6c1386e3092b2d9f84b5926cde2268c3.jpg)
Sent from my VK815 using Tapatalk
-
Lookin good!
-
Thanks Daryl.
Sent from my VK815 using Tapatalk
-
Mounted the holster to complete my belt. Got my belt clips onto the TD and installed the brackets.(https://uploads.tapatalk-cdn.com/20180303/513c0901c4371b813bfa4c5959f85d2e.jpg)(https://uploads.tapatalk-cdn.com/20180303/2502268353c4dbe29a5af26b96b24133.jpg)(https://uploads.tapatalk-cdn.com/20180303/05a18d45ffe23de91a2af619ccd0538a.jpg)(https://uploads.tapatalk-cdn.com/20180303/1e530adf49f4a4a5e0f383cc34e3a13d.jpg)(https://uploads.tapatalk-cdn.com/20180303/22776a9be08ecb946b2c47d6a2399424.jpg)(https://uploads.tapatalk-cdn.com/20180303/557396c6c625552f5acf5f8017015103.jpg)(https://uploads.tapatalk-cdn.com/20180303/6e9a5089f6513b3743494bae4c1ff15a.jpg)
Sent from my VK815 using Tapatalk
-
So many updates. Strapping is done but now need to do a repair on the left thigh. Another case of over trimming, but it's only 1 or 2mm. Doing another attempt on my neck seal while mulling about how to do the thigh.(https://uploads.tapatalk-cdn.com/20180311/d427d6a39a915d7dddce00c2c54cf82e.jpg)(https://uploads.tapatalk-cdn.com/20180311/a00cf5ec0f15510c5c8bd5c68bdde0d2.jpg)(https://uploads.tapatalk-cdn.com/20180311/a456d514f2147d6110817fc577ee56ca.jpg)(https://uploads.tapatalk-cdn.com/20180311/6ffbfe2a675ae81a57158f3518b41bc6.jpg)(https://uploads.tapatalk-cdn.com/20180311/50f966f376754b4ca29f2eaa1ac3c15b.jpg)(https://uploads.tapatalk-cdn.com/20180311/67e0f8e378e4090b8def5d26ad430c9b.jpg)(https://uploads.tapatalk-cdn.com/20180311/21a29a8bc7f66e4d34d6f2853466cc81.jpg)(https://uploads.tapatalk-cdn.com/20180311/b23f85aaf2b6566b63c19d9c6f2f5b05.jpg)
Sent from my VK815 using Tapatalk
-
Neck seal 3.0 much better now just need to add the bib section and it's done.(https://uploads.tapatalk-cdn.com/20180312/0e67a98cf2cf35bfa5be1ec195d347d1.jpg)(https://uploads.tapatalk-cdn.com/20180312/ad627c530b755af15f2169b1e61e2bee.jpg)
Sent from my VK815 using Tapatalk
-
So I decided to get back to the hard stuff. Shortened the thigh front cover strip. Dry fitting the repair area. Thinking I'll ca glue it to a improvised inner strip and then re-trim it after, but not sure if that's the right way to go. It makes sense to me for support and reinforcing. Also clipped down some scrap for abs paste. Then decided to put together my bra hooks and straps for the shin closure. I'm also working out how to get the rear cover strip flush.(https://uploads.tapatalk-cdn.com/20180316/c236406b075f8d2bf6602550453ac365.jpg)(https://uploads.tapatalk-cdn.com/20180316/e6b4f7334be8933547bbcb895b5555fa.jpg)(https://uploads.tapatalk-cdn.com/20180316/3086a584b01f5e7bd68e7fdbf525a523.jpg)(https://uploads.tapatalk-cdn.com/20180316/a824c2bad2a77ba05c62305b15fbac58.jpg)(https://uploads.tapatalk-cdn.com/20180316/bed834061aa910a9a40a68bea79f8011.jpg)(https://uploads.tapatalk-cdn.com/20180316/d52350e49eddf77d394126ef12e32885.jpg)
Sent from my VK815 using Tapatalk
-
Repair Work has begun.(https://uploads.tapatalk-cdn.com/20180319/4c1c6468f27c5d596426c17a1ac81dea.jpg)(https://uploads.tapatalk-cdn.com/20180319/bb9a1cea5a2cc55f631e55d23e58f558.jpg)
Sent from my VK815 using Tapatalk
-
First coat of paste is down. I'll probably do a couple more before I call it good and solid. What is a good grit sandpaper for the sanding I have a 400 or 600 wet/dry that's probably working more like a 1000 or more?(https://uploads.tapatalk-cdn.com/20180323/c3520eaa4c8839ab37cbb9935784d001.jpg)
Sent from my VK815 using Tapatalk
-
Second coat I think perhaps one more for the bottom and it be good. So how long should I let it set before sanding?(https://uploads.tapatalk-cdn.com/20180323/65a6936ae0c99cc2a40c7409b773afef.jpg)(https://uploads.tapatalk-cdn.com/20180323/09d424b4972bdc23b6763e10f02185c2.jpg)
Sent from my VK815 using Tapatalk
-
basd on solvent welding my styrene droid I'd say give it a solid 24 hours prior to sanding.. especially right now as its not as warm out to drive the solvents out. i would actually recommend starting at like 200grit and working your way up to the 400 then 600 wet. you may actually find that to get it super smooth to move to a 1200 after the 600.. then a plastic polish and a rag to take swirls and scratches out(usually the plastic polish is about 2k-3k grit) for that smooth plastic glass finish.
-
basd on solvent welding my styrene droid I'd say give it a solid 24 hours prior to sanding.. especially right now as its not as warm out to drive the solvents out. i would actually recommend starting at like 200grit and working your way up to the 400 then 600 wet. you may actually find that to get it super smooth to move to a 1200 after the 600.. then a plastic polish and a rag to take swirls and scratches out(usually the plastic polish is about 2k-3k grit) for that smooth plastic glass finish.
So after two coats on the top, three on the bottom and setting over night I gave it a quick once over sanding with some 60 grit, then 100, 220, 600 and a well used piece of 600 I think it may be ready for a polish.(https://uploads.tapatalk-cdn.com/20180323/88eb0b446e13f0c87252879e5292b7dc.jpg)(https://uploads.tapatalk-cdn.com/20180323/0ed4f9dbdb04ae23fe087ff25502d176.jpg)(https://uploads.tapatalk-cdn.com/20180323/376a1c1cbe29ade082f7d3662dee33cb.jpg)
Sent from my VK815 using Tapatalk
-
yeah you should def be good to go. once you put that cover strip on and if im looking at it right the ammo pack you wont ever even see it! Lots of good progress! sorry I havent chimed in for a bit.. been taking a small slow down from everything but building my clone armor! cant wait to troop with ya! TKs FTW!!
-
yeah you should def be good to go. once you put that cover strip on and if im looking at it right the ammo pack you wont ever even see it! Lots of good progress! sorry I havent chimed in for a bit.. been taking a small slow down from everything but building my clone armor! cant wait to troop with ya! TKs FTW!!
No ammo pack, this is the left thigh, but the knee plate will help covering it as well.
Sent from my VK815 using Tapatalk
-
So a quick update on my progress. I'm using the supplied strapping, but modifying it by adding snaps and using E-6000. Started getting my sew in snaps on and getting my shoulder elastic put on, but I'm not sure if I need to trim anymore any suggestions or advice is very welcome. I'm pretty sure I need to reshape the back plate shoulder strap and it seems my neck is really high and a bit narrow.(https://uploads.tapatalk-cdn.com/20180330/fd8558a22a2d355f5cd49eb4ede24fb0.jpg)(https://uploads.tapatalk-cdn.com/20180330/903cd9c833e97fbe8b7e2f2e441c66f3.jpg)(https://uploads.tapatalk-cdn.com/20180330/63b192974f575a501965a67306bc6969.jpg)(https://uploads.tapatalk-cdn.com/20180330/c06807b17997e3524bec95dd1fff32e3.jpg)(https://uploads.tapatalk-cdn.com/20180330/fbf406089300d0e5749b7a9c45bd1377.jpg)(https://uploads.tapatalk-cdn.com/20180330/e943a580171090d347297982fbbd3ec6.jpg)(https://uploads.tapatalk-cdn.com/20180330/9698ef6c9dd150f433486bfe75e4c83e.jpg)(https://uploads.tapatalk-cdn.com/20180330/bd16f5612658a2a82dbcb5e9f0bdd7a9.jpg)
Sent from my VK815 using Tapatalk
-
Looking good...it's really coming together! I'm curious to see what the vets say. I'm going to get to this part soon, while I wait for cover strips to cure.
Sent from my iPhone using Tapatalk
-
I’d recommend removing more of the return edge, gradually, on the shoulders on both the chest and back. Then use heat (gun or water) to ease the bend on the back shoulders.
-
I’d recommend removing more of the return edge, gradually, on the shoulders on both the chest and back. Then use heat (gun or water) to ease the bend on the back shoulders.
Yeah I figured that's what I would need to do. Thanks Daryl.
Sent from my VK815 using Tapatalk
-
Looking good...it's really coming together! I'm curious to see what the vets say. I'm going to get to this part soon, while I wait for cover strips to cure.
Sent from my iPhone using Tapatalk
Thanks D, it is slowly comin along.
Sent from my VK815 using Tapatalk
-
So more dry fitting and taped the shoulder and chest. I'm not sure why the chest feels like it rides so high and will definitely need to trim some of the neck on the right side and absolutely need to trim the left shoulder tab. Seriously digs. Also not sure how to close up the ab-kidney gap. I tried it with the belt on, but it didn't seem to help and I had it so the velcro was barely connected.(https://uploads.tapatalk-cdn.com/20180330/68587b586fe28b616dc04842251413c0.jpg)(https://uploads.tapatalk-cdn.com/20180330/b534bddd9d67a30479a7569536db7c11.jpg)(https://uploads.tapatalk-cdn.com/20180330/ba3b59934a374d95b7d9e7c79b7617af.jpg)(https://uploads.tapatalk-cdn.com/20180330/659eac2a55800bf68004b5984951f3ea.jpg)(https://uploads.tapatalk-cdn.com/20180330/54aff13fca00c683e93a84a5e646b7ec.jpg)(https://uploads.tapatalk-cdn.com/20180330/c45ca7522d01f08270e2b3508e9337db.jpg)
Sent from my VK815 using Tapatalk
-
So is that too much gap? I think it slipped a bit while gluing.(https://uploads.tapatalk-cdn.com/20180401/c9e865c5850048199a48b6ea8046e421.jpg)
Sent from my VK815 using Tapatalk
-
So I thought I would take a crack at repainting the frown and how do you get this stuff off? Tried 70% alcohol and mineral spirits and not even a dent, but I'm guessing it's very clean.(https://uploads.tapatalk-cdn.com/20180401/b1bb201beb94548b0be28fc3be97232d.jpg)
Sent from my VK815 using Tapatalk
-
I just used isopropyl alcohol and some q-tips. I don't remember the concentration I used though! It came off super easy for me so unless they changed whatever they used on the frown, I'd maybe try a slightly higher concentration? I might have done 80% or something. As always, try it on scrap first!
-
Yeah I have the v2 bucket so they may have changed something. I did test prior and yeah neither of those worked, but I know it's really clean so I'm just going to paint over it.
Sent from my VK815 using Tapatalk
-
looks great so far!
-
Thanks I ended up having to reglue my thigh and doing the knee plate and then I should have a left leg completed.
Sent from my VK815 using Tapatalk
-
So I think I officially have a left leg that is 99% complete. Just need to add the suspension strap for the belt and glue down my shin elastic for the bra clips.(https://uploads.tapatalk-cdn.com/20180403/ceea40d4b7039a2a1449e5d78bf74712.jpg)(https://uploads.tapatalk-cdn.com/20180403/09b2701632bfb8d9388d4fdcf8b5377a.jpg)(https://uploads.tapatalk-cdn.com/20180403/c2c78a0a273f30dd953237f6f2bbf99c.jpg)(https://uploads.tapatalk-cdn.com/20180403/ae0683a7d16949fde71251d82e8f234f.jpg)
Sent from my VK815 using Tapatalk
-
Oh and I did clean up all the glue after I took these.
Sent from my VK815 using Tapatalk
-
So I'm having a bit of a dilemma on my right leg. My thigh isn't setting flush to glue the rear cover strip. I tried to heat it and reshape it enough and that didn't help and I tried to clamp and magnet it together with a strip of steel with no luck either. After the clamping and magnets i still end up with about 2-3mm between the strip and the armor. Any other ideas?
The other is my shin, it fits well enough but it is overlapping top to bottom. I could trim some, but I know that the ankle can't lose anything. Not sure if I want to attempt reshaping or not.
I get some pictures when I get back inside.
Sent from my VK815 using Tapatalk
-
Here are some pictures.(https://uploads.tapatalk-cdn.com/20180406/0050aa2bcd2145a4bd63816bdb3a730d.jpg)(https://uploads.tapatalk-cdn.com/20180406/6897969f120818fc6c88f24be2ca7f02.jpg)(https://uploads.tapatalk-cdn.com/20180406/5ef5679df9cd925a780014169ff55f86.jpg)(https://uploads.tapatalk-cdn.com/20180406/68d2c6c15e591c9529144e50ba0b0be0.jpg)
Sent from my VK815 using Tapatalk
-
So I worked out the thigh issue.(https://uploads.tapatalk-cdn.com/20180410/ffda3a51ed994e8a6508767d3235a882.jpg)
Sent from my VK815 using Tapatalk
-
Main construction is complete now for sorting out the little things. Back shoulder connection reshaping, right shin refitting, getting the shin elastic and clips glued and painting and I think it'll be basic approval ready.(https://uploads.tapatalk-cdn.com/20180410/d6aa3a2d69918142398b0a53645e6e22.jpg)
Sent from my VK815 using Tapatalk
-
Main construction is complete now for sorting out the little things. Back shoulder connection reshaping, right shin refitting, getting the shin elastic and clips glued and painting and I think it'll be basic approval ready.(https://uploads.tapatalk-cdn.com/20180410/d6aa3a2d69918142398b0a53645e6e22.jpg)
Sent from my VK815 using Tapatalk
Nice work, looking real good there!
Sent from my iPhone using Tapatalk
-
So did some clean up on the frown and eyes and repainted the frown.(https://uploads.tapatalk-cdn.com/20180412/139ecd21e5bb82a8bcf56fb63591fadd.jpg)(https://uploads.tapatalk-cdn.com/20180412/a164149d922a35a4e02a36eb372d9c32.jpg)
Sent from my VK815 using Tapatalk
-
Still working out the best way to permanently mount my lenses but for now the "tape" that was holding the frown Mrs is working.
So I got the heat gun out and did some reshaping of the back shoulder straps? Wings? You folks know what I'm talking about. The fit is better and they don't bite as much now. However the chest still feels like it is riding high and the seems to be a lot of left over space in the chest. Also got the right shin retrimmed and cover strip is gluing now. I also got the thigh ammo pack drilled and soft mounted it's a bit late for the hammering to finish it off tonight.(https://uploads.tapatalk-cdn.com/20180413/c937fe264205626b4876d67269e37efc.jpg)(https://uploads.tapatalk-cdn.com/20180413/dba855ad27bd7c7a2bc82a25ef86d31a.jpg)(https://uploads.tapatalk-cdn.com/20180413/e166a9590d3380b1729ab479af11c34b.jpg)(https://uploads.tapatalk-cdn.com/20180413/679657095873a355e34b61c6f522af05.jpg)
Sent from my VK815 using Tapatalk
-
Would these be suitable for the TD?(https://uploads.tapatalk-cdn.com/20180414/d48dfa127ff670c67054a01dfc2d704d.jpg)(https://uploads.tapatalk-cdn.com/20180414/41520b2e9d8a10bb7c590046af7ccfb8.jpg)
Sent from my VK815 using Tapatalk
-
The slotted pan-heads look correct. Pain them black.
-
So I've been busy and haven't done much with the armor, but it is getting near completion. However I am revisiting my rubies E-11 with some upgrades.(https://uploads.tapatalk-cdn.com/20180516/0cca8c315674f40da60d5c25ce4fb41a.jpg)(https://uploads.tapatalk-cdn.com/20180516/8f958f15fa8500046ac3782631a67ce9.jpg)(https://uploads.tapatalk-cdn.com/20180516/ebe9042d5c4b34dac70b27ae8830a001.jpg)
Sent from my VK815 using Tapatalk
-
A little more progress on the E-11.(https://uploads.tapatalk-cdn.com/20180517/fa622cb30cb79c10212409422be14572.jpg)(https://uploads.tapatalk-cdn.com/20180517/838dd442b99659d87d01d9166175f4c1.jpg)(https://uploads.tapatalk-cdn.com/20180517/a8273688fe6976a59f73746008b95c76.jpg)(https://uploads.tapatalk-cdn.com/20180517/433308aada0f72059057b96ab5675c49.jpg)(https://uploads.tapatalk-cdn.com/20180517/2a108e05dad0b4adaaeb0449c3adfe07.jpg)
Sent from my VK815 using Tapatalk
-
Blaster update and a quick armor update, no pictures, I'll get some later. But I finally got my elastic and shoulder straps measured and glued.(https://uploads.tapatalk-cdn.com/20180609/96f42565882f0f152c72313e79101bad.jpg)(https://uploads.tapatalk-cdn.com/20180609/b60d597856cc7f58408042eceb21df7b.jpg)(https://uploads.tapatalk-cdn.com/20180609/a989e6d76d8a86eb7c4a4c573d3ef030.jpg)(https://uploads.tapatalk-cdn.com/20180609/499976f836f1493514b850bf4fad7ac1.jpg)(https://uploads.tapatalk-cdn.com/20180609/92ff25740cee9cc30f3e5339593789ab.jpg)(https://uploads.tapatalk-cdn.com/20180609/29d9b548f46a117e07b8c5ba523d573c.jpg)(https://uploads.tapatalk-cdn.com/20180609/203894e31c34574d0cbd81a3ecbdfa79.jpg)(https://uploads.tapatalk-cdn.com/20180609/e3f198e0f61572f4c3374b1dbfd9c13e.jpg)(https://uploads.tapatalk-cdn.com/20180609/86a583e22f89ea278a131b64a0cfa642.jpg)
Sent from my VK815 using Tapatalk
-
So finally got to my shoulder straps. Elastic and hard straps done, unfortunately the right one I believe decided to wander a bit so I'll need to reglue it probably tomorrow.(https://uploads.tapatalk-cdn.com/20180611/7f9b341b23d56920a671efaf5fee754d.jpg)
Sent from my VK815 using Tapatalk
-
Alright got the straps glued in but need to readjust my right one as it slipped a bit while gluing.(https://uploads.tapatalk-cdn.com/20180612/30d112575dc229086cb113ac73cc414e.jpg)(https://uploads.tapatalk-cdn.com/20180612/d8945d6654494701b1da333c90c8b233.jpg)(https://uploads.tapatalk-cdn.com/20180612/34c9d921c83009166ee9c01a653e258b.jpg)
Sent from my VK815 using Tapatalk
-
Shoulder straps readjusted and that's the torso completed. Was going to do the shin closures but it will have to wait until later because of graduation number two this evening.(https://uploads.tapatalk-cdn.com/20180613/2fb6758e75a3d004d21ec5fedd26a6b5.jpg)(https://uploads.tapatalk-cdn.com/20180613/b6d96f9bde174a4ad18d0382ac130788.jpg)(https://uploads.tapatalk-cdn.com/20180613/0f7867c27fab06183333af554ce26234.jpg)(https://uploads.tapatalk-cdn.com/20180613/5eb3a9b54ded467341e8b254a29c87a3.jpg)
Sent from my VK815 using Tapatalk
-
Coming along nicely!
-
Coming along nicely!
Thanks doing a little at a time.
Sent from my VK815 using Tapatalk
-
So getting the shin closures done, but realized I may need to remake them or may just need to reposition them. I also trim my return edges on the thighs and left shin since they are out at the moment for gluing.(https://uploads.tapatalk-cdn.com/20180617/a0fdcc780092b5ddc6c1cb23ac128b38.jpg)(https://uploads.tapatalk-cdn.com/20180617/4c08bb52c0fe33d3abacd50c66e2ad15.jpg)(https://uploads.tapatalk-cdn.com/20180617/21f977609fdc5deb7fe56f4440d5ba38.jpg)
Sent from my VK815 using Tapatalk
-
I do believe I am finished minus a couple of little things and paint I'm pretty sure I'm complete. Pictures to come.
Sent from my VK815 using Tapatalk
-
First time getting it all on at once.(https://uploads.tapatalk-cdn.com/20180621/a2a27efd495e59946a62797cb358a6b3.jpg)(https://uploads.tapatalk-cdn.com/20180621/a3fa032c33b172544ce45626f7c55b32.jpg)(https://uploads.tapatalk-cdn.com/20180621/7f272bbfb4ac4d7e6594c69729ac320b.jpg)(https://uploads.tapatalk-cdn.com/20180621/2f4d9deb6c2d116189fd8846d1074da5.jpg)(https://uploads.tapatalk-cdn.com/20180621/aabda619ff486a571db9ba66b943a5df.jpg)(https://uploads.tapatalk-cdn.com/20180621/c3482736bc458a443ff24d13fe44933e.jpg)(https://uploads.tapatalk-cdn.com/20180621/7c7f5cd4d9970b304bd02c0b4276c41b.jpg)(https://uploads.tapatalk-cdn.com/20180621/ec1edb6690db42a6d4ec6ede616546eb.jpg)(https://uploads.tapatalk-cdn.com/20180621/460ee4a67284b7b3ed35e75e6e135cab.jpg)
Sent from my VK815 using Tapatalk
-
Looking really good.
One suggestion... your belt looks like it’s sagging in the front. To raise the front I’d recommend either lowering the belt in the back, or adding Velcro under the front to raise and keep the front higher.
If that doesn’t work you might have to reposition your ab snaps.
-
Looking really good.
One suggestion... your belt looks like it’s sagging in the front. To raise the front I’d recommend either lowering the belt in the back, or adding Velcro under the front to raise and keep the front higher.
If that doesn’t work you might have to reposition your ab snaps.
Yeah it was just high in the back. Figured I didn't do too bad for doing by myself and for the first time.
Sent from my VK815 using Tapatalk
-
Looking good the only thing that jumps out at me is the straps for the holster should be on the inside of the belt when worn.
(https://uploads.tapatalk-cdn.com/20180621/ab1d916f57c4175304738deba949d8c8.jpg)
Jim - TK50899
-
Looking good the only thing that jumps out at me is the straps for the holster should be on the inside of the belt when worn.
(https://uploads.tapatalk-cdn.com/20180621/ab1d916f57c4175304738deba949d8c8.jpg)
Jim - TK50899
Thanks Jim, yeah wasn't paying attention when I put my belt back together after readjusting the velcro. The belt was way to long with the placement of the velcro.
Sent from my VK815 using Tapatalk
-
I am also aware that my drop boxes are tucked up under the belt.
Sent from my VK815 using Tapatalk
-
Looking good, Rat! So close to submitting! Can't wait to troop with you!
-
Looking good, Rat! So close to submitting! Can't wait to troop with you!
Same here Michael.
Sent from my VK815 using Tapatalk
-
So after making it over to the armor party yesterday and speaking with Chris and Luke, thanks for the help on this, I am going to have to trim down my thighs. The tops touch my hips and the bottoms set just about the middle of my kneecaps. I've also decided that I am going to trim out the back return edge to gain a little more range of motion.
Sent from my VK815 using Tapatalk
-
Been procrastinating on trimming my thighs down, but been working on that not so great looking blaster and spare bits Chris gave me, again very grateful for the generosity there. Getting a bit here and there done gonna be doing some scratch built replacements I can see. Just ordered a hengstler counter for it since it was the one part I needed but didn't have. I also just now put in an order for some silicone hand guards for when I finish my build and go for centurion. Slow and steady, slow and steady.
Sent from my VK815 using Tapatalk
-
Just got my silicone hand guards from Joseph over on FISD. These things are already comfy and I haven't even gotten them on my gloves yet.(https://uploads.tapatalk-cdn.com/20180710/3d149b432a297ac83e51cb06905da064.jpg)(https://uploads.tapatalk-cdn.com/20180710/ee17c19bae0009b766ccaa2e396f3160.jpg)
Sent from my VK815 using Tapatalk
-
Minor update, finally trimmed down my thighs and removed some excess return edge. Things are coming to completion.(https://uploads.tapatalk-cdn.com/20180804/828374f10f68899977b191df5beea1f2.jpg)
Sent from my VK815 using Tapatalk
-
excellent! Submission pics this weekend? :)
-
excellent! Submission pics this weekend? :)
Possibly. I'm looking at giving that blaster a bit of a putty makeover.
Sent from my VK815 using Tapatalk
-
So the more think of it no pics this weekend, but would it be possible to get meet up? I need help shaping my shins.
excellent! Submission pics this weekend? :)
Sent from my VK815 using Tapatalk
-
So the more think of it no pics this weekend, but would it be possible to get meet up? I need help shaping my shins.excellent! Submission pics this weekend? :)
Sent from my VK815 using Tapatalk
possibly tomorrow night. I have family event this afternoon/night.
-
So the more think of it no pics this weekend, but would it be possible to get meet up? I need help shaping my shins.excellent! Submission pics this weekend? :)
Sent from my VK815 using Tapatalk
possibly tomorrow night. I have family event this afternoon/night.
No problem there weekends are tough for me scheduling stuff. I'm free until 9:30 tomorrow night as I'm mid work week now.
Sent from my VK815 using Tapatalk
-
More trimming and fitting, but I also got some pictures finally and put in for a pre-approval check.(https://uploads.tapatalk-cdn.com/20180810/18f1e0f3625d37d7270924f748392e30.jpg)(https://uploads.tapatalk-cdn.com/20180810/ee8ff24166689e86b9d9c3c55637e8e5.jpg)(https://uploads.tapatalk-cdn.com/20180810/950007fe85d0f73ef7978034a756f7f5.jpg)(https://uploads.tapatalk-cdn.com/20180810/f5e27b28f5006d3303c183cf84487815.jpg)(https://uploads.tapatalk-cdn.com/20180810/04d0254a73c89d070071c73c08c5ee55.jpg)
Sent from my VK815 using Tapatalk
-
Wow, Rat! Looks good to me!!!
-
Wow, Rat! Looks good to me!!!
Thanks Michael.
Sent from my VK815 using Tapatalk
-
Nice work!
Sent from my iPhone using Tapatalk
-
Nice work!
Sent from my iPhone using Tapatalk
Thanks Chris.
Sent from my VK815 using Tapatalk
-
Great job Rat! Looking forward to trooping with you.
-
Thanks Daryl me as well.
Great job Rat! Looking forward to trooping with you.
Sent from my VK815 using Tapatalk
-
So some of my adjustments and fixes from my pre-approval thread. There were these and I snipped the excess on the belt off also.(https://uploads.tapatalk-cdn.com/20180812/d9217435f528430437c51f9554591731.jpg)(https://uploads.tapatalk-cdn.com/20180812/27c675db7f9347fa99195e7e588ad224.jpg)(https://uploads.tapatalk-cdn.com/20180812/2cd9c08c64e6a4272fcecf1619ef86aa.jpg)(https://uploads.tapatalk-cdn.com/20180812/ea6294ce1c1f70460764e76d9eca9e7a.jpg)
Sent from my VK815 using Tapatalk
-
So was approved and applied for EIB and got it. Now making slight adjustments for my Centurion application.(https://uploads.tapatalk-cdn.com/20180921/1267fb12a034a3e3375845b4edf1d603.jpg)(https://uploads.tapatalk-cdn.com/20180921/408cfc7aaeab642ebc98234a11567c61.jpg)(https://uploads.tapatalk-cdn.com/20180921/12117222e6aa2c0f99dbb95b85b8c09b.jpg)(https://uploads.tapatalk-cdn.com/20180921/4dfcfe0a4811ed56dbd68398410e5dfb.jpg)
Sent from my VK815 using Tapatalk